Description: 这篇实验报告阐述了无线通信系统仿真的原理。主要完成两个任务，任务一是BPSK调制在AWGN信道和在rayleigh信道下的性能比较，任务二 CDMA扩频多用户系统。这篇报告介绍了相关原理，并且在附录上有matalb源代码及注释。-This report describes the experimental wireless communications system simulation theory. Completed two major tasks, First, the task BPSK modulation in AWGN channel and rayleigh channel, the comparison two tasks CDMA multi-user system. This report describes the relevant principles, and the appendix are matalb source code and the Notes. Platform: |
Size: 751616 |
Author:蔡育瑜 |
Hits:
Description: 在无线通信中，存在着严重的多径现象，能够引起严重的ISI。判决反馈均衡器（DFE）是目前最常用的一种消除ISI的均衡器。本程序使用Matlab实现的QPSK下的DFE。-In wireless communication, there is a serious multi-path phenomenon, can cause severe ISI. Decision feedback equalizer (DFE) is the most commonly used in an equalizer to eliminate the ISI. This procedure using Matlab under QPSK realize the DFE. Platform: |
Size: 8192 |
Author:张祥 |
Hits:
Description: 基于OFDM的无线宽带系统仿真It contains mainly two parts, i.e. link-level simulator and system-level simulator.
Link-level simulator focus on a single-cell single-user scenario, where signal is transmitted from tx, and estimated at rx. Comparing the difference in tx/rx signal, the error rate can be found out. The output of the link-level simulator is the BLER/BER vs. SNR mapping table, that can be used for the system-level simulation.
System-level simulator focus on a multi-cell multi-user scenario. For the sake of simplicity, it takes the mapping table aquired in the link-level simulation, measure the actural SNR, and finds the corresponding error rate.-OFDM-based wireless broadband system simulation It contains mainly two parts, ie link-level simulator and system-level simulator.Link-level simulator focus on a single-cell single-user scenario, where signal is transmitted from tx, and estimated at rx . Comparing the difference in tx/rx signal, the error rate can be found out. The output of the link-level simulator is the BLER/BER vs. SNR mapping table, that can be used for the system-level simulation.System- level simulator focus on a multi-cell multi-user scenario. For the sake of simplicity, it takes the mapping table aquired in the link-level simulation, measure the actural SNR, and finds the corresponding error rate. Platform: |
Size: 256000 |
Author:zhangli |
Hits:
Description: 盲信号分离是当前信号处理研究的热点课题之一，在无线数据通信、医学、语音以及地震信号处理等领域有着广阔的应用前景。基于负熵最大的FastICA算法用于实现盲信号分离。该方法的基本思路是以非高斯信号为研究对象，在独立性假设的前提下，对多路观测信号进行盲源分离。在满足一定的条件下，能够从多路观测信号中，较好地分离出隐含的独立源信号。-Blind signal separation is the study of signal processing, one of the hot topics in wireless data communications, medical, speech and seismic signal processing and other fields have broad application prospects. Negentropy based on the largest FastICA Algorithm for Blind Signal Separation realize. The basic idea is based on non-Gaussian signal as the research object, in the independence assumptions on the multi-channel observation signal blind source separation. In meeting certain conditions, be able to multi-channel observation signal, the better to isolate the independent source signal implied. Platform: |
Size: 1024 |
Author:msw |
Hits:
Description: 本程序为实验性程序，验证了平面上到多点距离之和等于定长的点的轨迹，是未加权的无线传感器网络的仿真原型程序，并附实验报告。-This procedure for the experimental procedures, to verify the plane to multi-point distance and the point equivalent to fixed-length track is unweighted wireless sensor network prototype simulation program, together with the experimental report. Platform: |
Size: 45056 |
Author:tedachun |
Hits:
Description: 把地理区域分成一个个小区，蜂窝系统在该区域内提供无线覆盖。把可用的频谱分成很多信道，每个小区分配一组信道。使用频分双工（FDD）。在小区间进行频率利用，N个小区构成一个簇，簇间进行频率复用。定义了传播特性（信道参数）以及同频小区的位置。信道的参数包括：小区半径，路径损耗指数，以分贝为单位的对数正态阴影的标准差，基站发射功率级，移动台发射功率级，每个小区的扇区数，扇区化天线的正反向比，要仿真的瞬时位置的组数，同频干扰阈值。-To a geographical area is divided into small areas, cellular systems in the region to provide wireless coverage. The available spectrum is divided into multi-channel, each plot the distribution of a group of channels. The use of frequency division duplex (FDD). In the district between the frequency of use, N plots constitute a cluster, cluster between frequency reuse. The definition of the propagation characteristics (channel parameters), as well as with the frequency of residential location. Channel parameters include: cell radius, path loss index to decibels for units Lognormal shadow of the standard deviation, the base station transmitter power level, mobile station transmitting power level, the number of sectors in each district, sector of the antenna the pros and cons to the ratio, to the transient simulation of the group a few positions, the same frequency interference threshold. Platform: |
Size: 2048 |
Author:mame |
Hits:
Description: QPSK系统在无线通信信道中的仿真,通过对有若干条（大于2条）路径的无线多径衰落信道中的QPSK系统进行误码率性能仿真，并在与理想的高斯加性白噪声信道中同样系统的BER性能进行比较，利用SA方法给出本仿真模型的仿真结果-QPSK system in the wireless communications channel simulation, through a number of articles (more than 2) the path of wireless multi-path fading channel QPSK system BER performance simulation, and at high places like the ideal of white noise channel BER performance of the same system for comparison, using SA method give the simulation model of the simulation results Platform: |
Size: 2048 |
Author:andy |
Hits:
Description: 本论文以OFDM系统为基础，介绍了OFDM系统的基本原理，以及使用OFDM技术的优势所在，并且展望了今后的无线移动技术的发展前景。在简单介绍OFDM原理的同时，着重阐述了OFDM系统在不同信道环境和不同实现方式下的误码性能。主要包括了OFDM系统在加性白高斯信道，在加性白高斯信道和多径干扰两种不同信道环境下系统的误码性能，其中后者还研究了系统在有保护间隔与无保护间隔的误码性能比较。在理论分析的基础上，用MATLAB进行仿真，最后做出误码性能的分析和比较。 -This paper has OFDM systems based on OFDM systems introduces the basic principles and the use of the advantages of OFDM technology, and to look towards the future of wireless mobile technology development prospects. In a brief OFDM principles, while focusing on the OFDM system under different channel environments and different modes to achieve the error performance. Mainly include the OFDM system in additive white Gaussian channel, in the additive white Gaussian channel and multi-path interference of two different channel environment, the system BER performance, the latter of which also studied the system in a guard interval and non-protected BER performance comparison interval. The theoretical basis of the analysis, using MATLAB simulation, finally make a bit error performance analysis and comparison. Platform: |
Size: 1953792 |
Author:王斌 |
Hits:
Description: 正交频分复用技术是近年来发展起来的新技术,在高速无线数据传输领域有很大的应用前景。文章在分析和总结相关文献的基础上,介绍了正交频分复用(OFDM)技术的发展历史,讨论了正交频分复用技术的基本原理和实现方法。通过分析表明,在高速无线通信中OFDM对于消除符号间干扰(ISI),降低系统的复杂度等方面具有很大优势。正交频分复用(OFDM)是一种多载波宽带数字调制技术,它能有效地克服传输中的多径干扰和消除码间串扰,适合于高速率的地面信道视频传输。本文就OFDM技术进行了较为详尽的分析,并对OFDM的传输特性进行了基于FFT算法实现的MATLAB软件模拟及模拟结果分析。 -OFDM is a new technology developed in recent years, high-speed wireless data transmission in the field of great applications. This paper analyzes and summarizes the basis of relevant literature, describes orthogonal frequency division multiplexing (OFDM) technology, history, orthogonal frequency division multiplexing discussed the basic principles and implementation methods. The analysis shows that in the high-speed wireless communication in OFDM symbol for the elimination of interference (ISI), and so reduce the complexity of the system has great advantages. Orthogonal frequency division multiplexing (OFDM) is a multi-carrier wideband digital modulation techniques, can effectively overcome the transmission of multi-path interference and the elimination of intersymbol interference, the ground for high-speed video transmission channel. In this paper, OFDM technology, a more detailed analysis, and transmission characteristics of OFDM FFT algorithm based on the MATLAB software simulation Platform: |
Size: 71680 |
Author:罗萍 |
Hits:
Description: 经典书籍 剑桥大学大学出版社： 无线通信基础-Book Description:
The past decade has seen many advances in physical layer wireless communication theory and their implementation in wireless systems. This textbook takes a unified view of the fundamentals of wireless communication and explains the web of concepts underpinning these advances at a level accessible to an audience with a basic background in probability and digital communication. Topics covered include MIMO (multi-input, multi-output) communication, space-time coding, opportunistic communication, OFDM and CDMA. The concepts are illustrated using many examples from real wireless systems such as GSM, IS-95 (CDMA), IS-856 (1 x EV-DO), Flash OFDM and UWB (ultra-wideband). Particular emphasis is placed on the interplay between concepts and their implementation in real systems. An abundant supply of exercises and figures reinforce the material in the text. This book is intended for use on graduate courses in electrical and computer engineering and will also be of great interes Platform: |
Size: 4332544 |
Author:opaque |
Hits:
Description: 设计无线传感器网络的路由协议，LEACH是第一个基于多簇结构的集群路由协议，是一种分布式的协议,每一个节点通过一个概率来决定自己是否成为簇头节点,并保证每轮有相当数量的簇头节点.
-Design of wireless sensor network routing protocol, LEACH is the first structure of a cluster based on multi-cluster routing protocol, the protocol is a distributed, each node to determine their own through a probability whether a cluster head node, and to ensure that each round there is considerable number of cluster head node. Platform: |
Size: 51200 |
Author:杨扬 |
Hits:
Description: 这个文件在matlab环境下，实现了多径衰落信道的仿真。可以应用在无线通信仿真中。无线通信的仿真离不开信道。-This file is in the matlab environment, to achieve a multi-path fading channel simulation. Can be used in wireless communication simulation. Simulation of wireless communication channel can not be separated. Platform: |
Size: 1024 |
Author:张秀宁 |
Hits:
Description: Wireless Sensor Networks (WSN) is different than the Cellular Networks as I mentioned earlier.
A WSN is composed of a large number of sensor nodes that communicate using a wireless medium (air).
The sensor nodes are deployed randomly in the environment to be monitored.
The sensor nodes distributed in ad hoc structure.
In WSN there is no base station and not all nodes hear each other.
The WSN is a multi-hop network.
Basic part of my code is to randomly place the sensor nodes in the given space then connecting each two nodes if the distance between them less than or equal to the communication radius. Platform: |
Size: 41984 |
Author:khala |
Hits:
Description: 本书从信息论与错误概率的角度，着重分析了真实世界传播如何影响MIMO容量和性能，实际鲁棒的空时码的设计，详细讨论了预编码、天线选择和多载波传输。-Book from the perspective of information theory and error probability, focused on analysis of real-world communication can affect MIMO capacity and performance, the actual robustness of space-time code design, discussed in detail pre-coding, antenna selection and multi-carrier transmission. Platform: |
Size: 3250176 |
Author:anjie |
Hits:
Description: This File contains Matlab code for SIMPLE and ATTEMPT. Stable Increased-throughput Multi-hop Protocol for Link Efficiency(SIMPLE) is a Routing Protocol for Wireless Body Area Networks.SIMPLE Routing Protocol and ATTEMPT Routing Protocol are implemented in Matlab. Both Protocols are compared and found that SIMPLE is better protocol then ATTEMPT in terms of Throughput, Path Loss and Remaining Energy. Platform: |
Size: 5120 |
Author:Kamran Khan |
Hits:
Description: 扩频通信在现代无线通信技术中是一种具有较强抗干扰性能的技术，正交频分复用(OFDM)一种具有较高数据传输速率和频谱利用率，并能有效对抗频率选择性衰落的多载波调制技术，因而将这二者结合起来构建系统势必会进一步提高系统的抗干扰和抗衰落性能，研究其结合技术也逐渐成为无线通信领域的热点。随着3G的兴起，即将推出的LTE也将采用OFDM技术（正交频分多路复用）。
由于OFDM的多载波特性，使得直接序列扩频技术和跳频技术能够与OFDM技术进行有效的结合。在本文中,我们研究了OFDM）以及相关抗干扰抗衰落技术。同时用matlab进行了仿真，仿真结果表明，本文提出的ICI干扰消除技术在ofdm中起到了很好的效果。
-In modern wireless communication technologies, spread spectrum communication is a kind of strong anti-jamming technology, the performance of orthogonal frequency division multiplexing (OFDM) is a kind of high data rate and spectrum efficiency, and can be effective against frequency selective fading of multi-carrier modulation technology, and combine the two build system is bound to further improve the system s anti-interference and decay resistance, and study the combining technology also gradually become a hot spot in the field of wireless communications. With the development of 3 g, the upcoming LTE will also use OFDM (orthogonal frequency division multiplexing) technology. Platform: |
Size: 489472 |
Author:wfyan |
Hits:
Description: 《无线通信FPGA设计》以Xilinx公司的FPGA开发平台为基础，综合FPGA和无线通信技术两个方向，通过大量的FPGA开发实例，较为详尽地描述了无线通信中常用模块的原理和实现流程，包括数字信号处理基础、数字滤波器、多速率信号处理、数字调制与解调、信道编码、系统同步、自适应滤波算法、最佳接收机，以及WCDMA系统的关键技术。《无线通信FPGA设计》概念明确、思路清晰，追求全面、系统、实用，使读者能够在较短的时间内具备无线通信领域的FPGA开发能力。(The design of wireless communication FPGA is based on the development platform of Xilinx's FPGA and combines the two directions of FPGA and wireless communication technology. Through a large number of examples of FPGA development, the principle and implementation process of common modules in wireless communication are described in detail, including the basis of digital signal processing, digital filter and multi-rate signal. Processing, digital modulation and demodulation, channel coding, system synchronization, adaptive filtering algorithm, optimal receiver, and key technologies of WCDMA system. The concept of Wireless Communication FPGA Design is clear, and the idea is clear. It pursues comprehensiveness, system and practicality, so that readers can have the ability to develop FPGA in the field of wireless communication in a relatively short time.) Platform: |
Size: 11018240 |
Author:无线电之家99 |
Hits:
Search - wireless multi in matlab